How to Clean Your Bathmate Pump with the Cleaning Kit: A Step-by-Step Guide

Quick Answer

To clean your Bathmate pump properly, disassemble it, rinse with warm water, use the Bathmate Cleaning Kit's sponge set to gently scrub all surfaces, and let it air dry completely before storing. Regular cleaning after each session prevents residue buildup and keeps your pump working effectively.

Keeping your Bathmate pump clean is not just about hygiene—it's also about performance. Residue from body oils, soap, and water minerals can build up inside the cylinder and on the valve, making it harder to achieve a proper seal and consistent pressure. A quick rinse is not enough; you need a thorough, systematic approach.

The Bathmate Cleaning Kit is designed specifically for this task. It includes a custom-designed sponge set that fits the contours of your pump, making it easy to reach every internal surface. Here's how to use it effectively, step by step.

What You Need for a Thorough Clean

Before you start, gather the Bathmate Cleaning Kit, a clean towel, and access to warm (not hot) water. The kit's sponge set is shaped to match the internal curves of Bathmate pumps, so it can clean areas that a cloth or your fingers might miss. Avoid using harsh chemical cleaners or abrasive brushes—they can damage the skin-safe materials and reduce the life of your pump.

You might also consider the Shower Essentials Kit if you want a more complete routine. It includes a towel and clean solution, along with a storage case to keep your pump dust-free between uses. For now, focus on the cleaning steps that will make the biggest difference.

• Always use warm water, not hot, to avoid warping or damaging the pump material.

Step-by-Step Cleaning Process

Start by disassembling your Bathmate pump according to the manufacturer's instructions. Remove any removable parts, such as the comfort insert or valve, so you can clean each component individually. This prevents water and residue from being trapped in hard-to-reach areas.

Rinse the main cylinder and parts under warm running water to remove loose debris. Then, wet the sponge from the Cleaning Kit and gently scrub the inside of the cylinder, paying extra attention to the base and the valve area where buildup often occurs. Use a circular motion and apply light pressure to avoid scratching the surface.

After scrubbing, rinse everything thoroughly again to remove any loosened residue. Shake off excess water and place the parts on a clean, dry towel to air dry completely. Do not reassemble until every component is fully dry—moisture can encourage mold or bacteria growth and may affect the pump's performance.

• Check the valve and comfort pad for residue; these are common spots for buildup.

Common Mistakes to Avoid

One common mistake is using soap or cleaning agents that are too harsh. These can leave a film that interferes with the pump's seal or irritates skin. Stick to warm water and the Cleaning Kit's sponge, or use a mild, unscented soap if needed—but rinse thoroughly.

Another mistake is skipping the drying step. Storing a damp pump can lead to unpleasant odors and reduce its lifespan. Make sure every part is completely dry before you store it in a clean, dry place. If you use the Shower Essentials Kit, its discreet storage case is perfect for this.

Finally, don't forget to clean the outside of the pump, including the bellows or handball. Residue on the exterior can make the pump slippery and harder to grip. Wipe it down with a damp cloth and dry it as part of your routine.

• Never use boiling water or put your Bathmate in the dishwasher; it can damage the material.

Cleaning Checklist

1. Disassemble: Take apart your Bathmate pump, removing all detachable parts like the comfort insert and valve. Checkpoint: If you can't remove a part, don't force it—refer to the manual.
2. Rinse: Rinse all components under warm running water to remove loose debris. Checkpoint: Use warm, not hot, water to protect the material.
3. Scrub: Use the Cleaning Kit's sponge to gently scrub the inside of the cylinder, valve, and base. Checkpoint: Pay extra attention to areas with visible residue.
4. Rinse Again: Thoroughly rinse everything to remove loosened residue and any soap film. Checkpoint: Run your finger along the surface to feel for any remaining slipperiness.
5. Dry Completely: Place all parts on a clean, dry towel and let them air dry fully before reassembling. Checkpoint: Wait until there is no moisture anywhere—this prevents mold and maintains performance.

Why the Cleaning Kit Works

• Cleaning Kit: The Bathmate Cleaning Kit combines a selection of accessories all making it easier to keep your Bathmate fully clean. A custom-designed sponge set (separately available as the Bathmate Cleaning Brush) made to keep any Bathmate totally hygienic. The sponge set is shaped to match your pump's curves, so you can reach every internal surface without scratching or missing spots—making your cleaning routine faster and more effective.
• Shower Essentials Kit: The Shower Essentials Kit brings together the essential tools that make every session smoother so you can focus on your training, not the setup. It includes a Towel & Clean Solution and a Discreet Storage Case. The included towel and clean solution simplify the cleaning process, while the storage case keeps your pump dust-free and protected between uses, supporting consistent hygiene.

A clean Bathmate pump is a reliable pump. By following this simple routine after each session, you'll keep your equipment hygienic, extend its lifespan, and ensure consistent performance. Make the Cleaning Kit part of your regular maintenance, and you'll always be ready for your next session.