How to Use a Bathmate Pump with the Shower Essentials Kit: A Step-by-Step Guide

Quick Answer

To use a Bathmate pump with the Shower Essentials Kit, start by attaching the shower strap or holder to a smooth wall, fill the pump with water, and position it over your base. Pump gently to create a comfortable vacuum, then follow the 15-minute session guidelines. Always drain and clean the pump after each use to maintain performance.

Using a Bathmate pump in the shower is a convenient way to incorporate water-based pumping into your routine. The Shower Essentials Kit includes accessories that make setup simple and keep your pump within reach. This guide walks you through each step, from preparation to post-session care.

Whether you're new to water pumping or looking to refine your routine, following a consistent process helps you get the most out of each session. We'll cover what to check before you start, how to position the pump correctly, and how to clean up afterward.

Before You Start: What to Check

Before you begin, make sure your Bathmate pump is clean and free of any debris. Rinse it with warm water and check the valve for proper function. If you're using the Shower Essentials Kit, verify that all components, such as the shower strap or pump holder, are securely attached.

It's also important to groom if needed. Trimming pubic hair can help create a better seal and make the pump more comfortable. The Bathmate Trim 2.0 is showerproof and offers two speed settings, making it a practical choice for pre-session grooming.

• Check the pump's valve and seal before each session.
• Ensure the shower area has enough space to move comfortably.

Setting Up the Shower Essentials Kit

The Shower Essentials Kit typically includes a shower strap and a pump holder. Attach the shower strap to a smooth, non-porous surface like tile or glass. The Bathmate Pump Holder attaches easily with a simple twist of the lock and keeps your pump within arm's reach, even when full of water.

Position the holder at a height that allows you to stand or sit comfortably while using the pump. Make sure it's secure before placing your pump on it. This setup lets you focus on your session without worrying about where to put the pump.

• Use the Bathmate Pump Holder to keep your pump off the floor and within reach.

Filling and Positioning the Pump

Fill the Bathmate pump with warm water before use. Warm water helps create a better seal and feels more comfortable against the skin. Submerge the pump opening in water and squeeze the bellows to draw water in, ensuring there are no air bubbles.

Position the pump over your base, pressing the opening firmly against your body. The water creates a seal that allows the vacuum to form. If you feel any discomfort, release pressure immediately and adjust the position.

• Use warm water for a better seal and comfort.

Pumping and Session Duration

Begin pumping by pressing the bellows or using the handball, depending on your model. Pump slowly and steadily, allowing your body to adjust. The goal is a comfortable vacuum that provides a stretch without pain.

A typical session lasts about 15 minutes. Start with shorter sessions if you're new to pumping, and gradually increase as you become more comfortable. Always listen to your body—if you feel any sharp pain, stop immediately.

• Never pump to the point of pain; comfort is key.

After Your Session: Draining and Cleaning

After your session, release the pressure by pressing the valve. Remove the pump and empty the water. Rinse the pump thoroughly with clean water to remove any residue.

Allow the pump to air dry completely before storing. The Bathmate Pump Holder can help here—place the pump on the holder to let it drain fully, which helps keep the valve and bellows in good condition. Regular cleaning prevents buildup and extends the life of your pump.

• Drain and air-dry your pump after every session to maintain hygiene.

Step-by-Step Shower Routine

1. Step 1: Prepare Your Pump: Rinse your Bathmate pump with warm water and check the valve for proper function. Ensure all parts are clean and free of debris. Checkpoint: If the valve feels loose or the pump doesn't hold water, replace it before your session.
2. Step 2: Set Up the Holder: Attach the Bathmate Pump Holder to a smooth wall at a comfortable height. Give it a firm twist to lock it in place. Checkpoint: Test the holder by gently pulling on it before placing your pump.
3. Step 3: Fill with Warm Water: Submerge the pump opening in warm water and squeeze the bellows to draw water in. Tap the pump to release any air bubbles. Checkpoint: Ensure there are no air pockets, as they can reduce the vacuum's effectiveness.
4. Step 4: Position and Pump: Place the pump over your base, pressing firmly to create a seal. Pump slowly to build a comfortable vacuum. Checkpoint: If you feel sharp pain, release pressure immediately and adjust the position.
5. Step 5: Session Time: Maintain the vacuum for about 15 minutes, or less if you're new. Keep the pressure comfortable throughout. Checkpoint: Set a timer to avoid over-pumping; consistency is more important than duration.
6. Step 6: Drain and Clean: Release the pressure, remove the pump, and empty the water. Rinse thoroughly and place on the holder to drain completely. Checkpoint: A dry pump is a healthy pump—always air-dry before storing.

Products That Support Your Shower Routine

• Bathmate Pump Holder: Designed to keep your pump in top condition, the Pump Holder also keeps your pump at arms-reach and ready for action. It attaches to a smooth surface easily with a simple twist of the lock and will hold our Bathmate pumps (even full of water) safely up on the wall. This holder keeps your pump secure and accessible during your shower routine, and allows it to drain completely between sessions, which helps maintain valve function.
• Trim 2.0: Showerproof & Powerful: IPX7 waterproof rating for convenient use in the shower, plus two speed settings to conquer any hair type. Trimming before pumping helps create a better seal and improves comfort, making the Trim 2.0 a practical addition to your shower routine.

Using a Bathmate pump with the Shower Essentials Kit is straightforward when you follow a consistent routine. From setting up the holder to cleaning after each session, these steps help you get the most from your pump while keeping it in top condition. Remember to listen to your body and adjust the pressure for comfort.