How to Clean Your Bathmate Pump with Bathmate Clean: A Step-by-Step Guide

Quick Answer

To clean your Bathmate pump, disassemble it as far as possible, rinse with warm water, use the Bathmate Cleaning Kit's custom sponge set to remove residue, then air dry completely before storing. Avoid harsh chemicals and always dry the valve area thoroughly to prevent damage.

Regular cleaning of your Bathmate pump is essential for hygiene and performance. A clean pump not only lasts longer but also works more effectively, ensuring you get the most out of each session. In this guide, we'll walk you through the process using the Bathmate Cleaning Kit, which includes a custom-designed sponge set to keep any Bathmate totally hygienic.

You'll also learn common mistakes to avoid, such as using harsh cleaners or neglecting the valve. By following these steps, you'll maintain your pump in top condition and protect your investment.

Why Cleaning Your Bathmate Pump Matters

Bathmate pumps are water-based, so they come into contact with moisture regularly. If not cleaned after each use, residue from body oils, skin cells, and water minerals can build up, leading to unpleasant odors and potential skin irritation. More importantly, a dirty pump can harbor bacteria, which is a health risk.

The manufacturer emphasizes that regular cleaning helps your pump last longer and, in many cases, work more effectively. The unique locking valve, which water passes through during pumping, is a moving part that can wear out over time if not kept clean and free from debris.

Using the Bathmate Cleaning Kit—which includes a custom sponge set and a cleaning brush (sold separately)—makes the job easier. The kit is designed specifically for Bathmate pumps, ensuring you can reach all nooks and crannies without damaging the device.

• Clean your pump after every use to prevent buildup.
• Use only the provided or recommended cleaning tools.
• Store your pump dry and disassembled if possible.

What You'll Need for Cleaning

Before you begin, gather the right supplies. The Bathmate Cleaning Kit contains a custom-designed sponge set made to keep any Bathmate totally hygienic. You may also have the Bathmate Cleaning Brush (sold separately) for more targeted scrubbing.

You'll need warm water (not hot, to avoid damaging the plastic), a clean towel, and a well-ventilated area to dry the pump. Avoid using soap or detergents unless they are specifically recommended, as they can leave residues that may irritate skin.

The kit also includes accessories that make it easier to keep your pump fully clean, so having it on hand simplifies the routine. If you don't have the kit, you can use a soft, lint-free cloth, but the sponge set is gentler and more effective for the pump's smooth surfaces.

Step-by-Step Cleaning Process

Follow these steps after each use to keep your Bathmate pump hygienic and functioning well.

First, disassemble the pump as far as your model allows. Remove any detachable parts such as the comfort pad or valve. Rinse all parts under warm running water to remove loose residue. Use the sponge set from the Bathmate Cleaning Kit to gently scrub the inside and outside, paying attention to crevices.

Next, clean the valve area carefully. The valve is a moving part that water passes through; make sure no debris is stuck. You can use the cleaning brush for this. Rinse again until no soap or residue remains.

Finally, shake off excess water and place all parts on a clean towel to air dry completely. Do not reassemble until everything is bone-dry. This prevents mildew and ensures the valve works smoothly. Once dry, store the pump in a clean, dry place away from direct sunlight.

Step-by-Step Routine

1. Disassemble and Rinse: Take apart your pump as far as possible. Rinse each part under warm running water to remove loose debris. Checkpoint: Ensure you've removed the comfort pad and valve if detachable.
2. Scrub with the Cleaning Kit: Use the custom sponge set from the Bathmate Cleaning Kit to gently scrub all surfaces, including inside the cylinder and around the valve. For tight spots, use the cleaning brush. Checkpoint: Avoid using abrasive brushes that could scratch the material; use only the supplied sponge.
3. Rinse Thoroughly: Rinse all parts again under warm water to remove any loosened residue and soap. Checkpoint: No slippery film should remain – if you feel any, rinse again.
4. Air Dry Completely: Place all parts on a clean dry towel and allow them to air dry. Do not reassemble until every part is completely dry. Checkpoint: Wait until no moisture is visible; this usually takes 1–2 hours.
5. Store Properly: Once dry, reassemble only if needed and store the pump in a clean, dry place away from direct sunlight. Consider using the Bathmate Pump Timer to track your sessions while keeping accessories dry. Checkpoint: Store the valve in a way that prevents dust from entering.

Products to Help You Clean

• Cleaning Kit: The Bathmate Cleaning Kit combines a selection of accessories all making it easier to keep your Bathmate fully clean. A custom-designed sponge set (separately available as the Bathmate Cleaning Brush) made to keep any Bathmate totally hygienic. Using the right tools ensures a thorough clean without scratching the pump's surface, which helps maintain its integrity and effectiveness.
• Bathmate Pump Timer: The Bathmate Direct Pump Timer is a waterproof accessory that guides you through the ideal Bathmate routine with a simple visual. A waterproof timer lets you keep track of session lengths without risking water damage, complementing your cleaning routine by keeping your accessories safe.

Cleaning your Bathmate pump after every use is a simple but important habit that protects your health and extends the life of your device. With the Bathmate Cleaning Kit, you have the right tools to make the process quick and effective. Follow these steps consistently, and your pump will stay hygienic and perform at its best for years to come.